D-Link DWL 2100AP
Ein Wireless Access Point von D-Link.
Wireless Access Point
- Hersteller/Type: D-Link DWL-2100AP
- Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point
- Sendeleistung: 15 dBm (15->32mW, 17->50mW, 20->100mW)
- WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater
- Firmware v1.01en –> v2.10eu rev 338 (18.06.2005)
- MAC: 00:11:95:D5:51:02
- Ethernet-Kabel-Verbindung zum Switch/Router
- Channel: 7 (22442 MHz)
- Security Level: WEP
- WEP Encryption: 128 Bit
- First Key: 6275…32
- Factory Reset IP-Adresse: 192.168.0.50
- Feste IP-Adresse: 192.168.1.3
- Default Gateway: 192.168.1.2 (WLAN Router/Switch)
- Wireless Modus = “Access Point” (war auf: “Client”)
- Antenne: D-Link DWL-M60AT (Gain 6 dBi – directional indoor antenna – 1,5 m Kabel) (besser: DWL-R60AT ohne Kabel)
- Security: 128-Bit WEP
- 802.11g only = Disabled (enabled would be faster)
- Super G Mode: Super G with dynamic Turbo (Super G = Compression, Turbo = multiple channels, Dynamic = downward compatible)
- telnet: set antenna 1 (was: best)
Konfiguration 2100AP
Das Notebook, mit dem man den 2100AP konfigurieren will, muss eine bestimmte IP-ADresse haben …..
Wireless Repeater
- Hersteller/Type: D-Link DWL-2100AP
- Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point
- WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater
- Firmware v1.01en –> v2.10eu rev 338 (18.06.2005)
- MAC: 00:11:95:D5:4F:D8
- Ethernet-Kabel-Verbindung: ./.
- Factory Reset IP-Adresse: 192.168.0.50
- Feste IP-Adresse: LAN 192.168.1.4
- Channel: (nimmt automatisch den vom Access Point)
- Antenne: WLA-5dBi – omnidiretional (19.05.2004)
- Security: 128-Bit WEP
- 802.11g only = Disabled (enabled would be faster)
- Super G Mode: Super G with dynamic Turbo
- telnet: set antenna 1 (was: best)
— Dkracht 22:02, 9 February 2008 (CET)